Document Center List of Standards on Metallic Coatings Including Electrolytic Depositions, Cathodic Coatings, Autocatalytic Coatings, Etc.
ICS Code 25.220.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1055 - Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- ASTM-A1059 - Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
- ASTM-A1072 - Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
- ASTM-A1073 - Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
- ASTM-A1074 - Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
- ASTM-A123 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM-A239 - Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,
- ASTM-A385 - Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
- ASTM-A428 - Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
- ASTM-A630 - Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
- ASTM-A780 - Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
- ASTM-A896 - Standard Practice for Conducting Case Studies on Galvanized Structures
- ASTM-A90 - Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- ASTM-A917 - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
- ASTM-A924 - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM-B137 - Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
- ASTM-B200 - Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
- ASTM-B201 - Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
- ASTM-B319 - Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
- ASTM-B322 - Standard Guide for Cleaning Metals Prior to Electroplating
- ASTM-B380 - Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- ASTM-B431 - Practice for Processing of Mandrels for Electroforming (Withdrawn 1993)
- ASTM-B450 - Practice for Engineering Design of Electroformed Articles (Withdrawn 1993)
- ASTM-B456 - Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus
Chromium and Nickel Plus Chromium - ASTM-B488 - Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
- ASTM-B489 - Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- ASTM-B490 - Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
- ASTM-B530 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- ASTM-B532 - Standard Specification for Appearance of Electroplated Plastic Surfaces
- ASTM-B533 - Standard Test Method for Peel Strength of Metal Electroplated Plastics
- ASTM-B537 - Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
- ASTM-B545 - Standard Specification for Electrodeposited Coatings of Tin
- ASTM-B555 - Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
- ASTM-B556 - Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
- ASTM-B571 - Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM-B578 - Standard Test Method for Microhardness of Electroplated Coatings
- ASTM-B579 - Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
- ASTM-B583 - Test Method for Porosity in Cold Coatings on Metal Substrates (Withdrawn 1985)
- ASTM-B602 - Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- ASTM-B604 - Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- ASTM-B605 - Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
- ASTM-B607 - Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
- ASTM-B633 - Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM-B634 - Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
- ASTM-B635 - Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
- ASTM-B636 - Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM-B650 - Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- ASTM-B651 - Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM-B679 - Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
- ASTM-B680 - Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
- ASTM-B689 - Standard Specification for Electroplated Engineering Nickel Coatings
- ASTM-B695 - Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
- ASTM-B696 - Standard Specification for Coatings of Cadmium Mechanically Deposited
- ASTM-B697 - Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
- ASTM-B699 - Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
- ASTM-B700 - Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- ASTM-B733 - Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
- ASTM-B734 - Standard Specification for Electrodeposited Copper for Engineering Uses
- ASTM-B735 - Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
- ASTM-B741 - Standard Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography (Withdrawn 2005)
- ASTM-B762 - Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- ASTM-B764 - Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
- ASTM-B765 - Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
- ASTM-B766 - Standard Specification for Electrodeposited Coatings of Cadmium
- ASTM-B767 - Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
- ASTM-B798 - Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
- ASTM-B799 - Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
- ASTM-B809 - Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
- ASTM-B816 - Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
- ASTM-B832 - Standard Guide for Electroforming with Nickel and Copper
- ASTM-B840 - Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
- ASTM-B841 - Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
- ASTM-B842 - Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits
- ASTM-B843 - Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
- ASTM-B851 - Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
- ASTM-B866 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
- ASTM-B867 - Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
- ASTM-B874 - Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
- ASTM-B875 - Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
- ASTM-B877 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
- ASTM-B904 - Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
- ASTM-B905 - Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
- ASTM-B920 - Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
- ASTM-B946 - Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
- ASTM-B975 - Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
- ASTM-B984 - Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
- ASTM-B994 - Standard Specification for Nickel-Cobalt Alloy Coating
- ASTM-B995 - Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
- ASTM-B999 - Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate
- ASTM-C633 - Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
- ASTM-D2092 - Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting (Withdrawn 2008)
- ASTM-D4370 - Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
- ASTM-D4399 - Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
- ASTM-D4584 - Standard Test Method for Measuring Apparent pH of Electrocoat Baths
- ASTM-D6492 - Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
- ASTM-D7639 - Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM-D7803 - Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
- ASTM-E1659 - Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet (Withdrawn 2021)
- ASTM-E2354 - Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units (Withdrawn 2019)
- ASTM-E2355 - Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface (Withdrawn 2019)
- ASTM-F1044 - Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM-F1136 - Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
- ASTM-F1136M - Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric] (Withdrawn 2011)
- ASTM-F1147 - Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
- ASTM-F1160 - Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM-F1367 - Standard Specification for Chromium Sputtering Targets for Thin Film Applications
- ASTM-F1594 - Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
- ASTM-F1941 - Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
- ASTM-F1941M - Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric] (Withdrawn 2015)
- ASTM-F1978 - Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
- ASTM-F2329 - Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
- ASTM-F2674 - Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
- ASTM-F2833 - Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
- ASTM-F3139 - Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM-F3166 - Standard Specification for High-Purity Titanium Sputtering Target Used for Through-Silicon Vias (TSV) Metallization
- ASTM-F3192 - Standard Specification for High-Purity Copper Sputtering Target Used for Through-Silicon Vias (TSV) Mettalization
- ASTM-F326 - Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
- ASTM-F44 - Standard Specification for Metallized Surfaces on Ceramic
- ASTM-F519 - Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
- ASTM-F871M - Specification for Electrodeposited Coatings on Threaded Components [Metric] (Withdrawn 2001)
- ASTM-G116 - Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
BSI:
- BS-1468 - Specification for tin anodes and tin salts for electroplating
- BS-1561 - Specification for silver anodes and silver salts for electroplating
- BS-1706 - Method for Specifying Electroplated Coatings of Zinc & Cadmium on Iron & Steel
- BS-1872 - Specification for electroplated coatings of tin
- BS-2569-2 - Protection of Iron and Steel Against Corrosion and Oxidationat Elevated Temperatures.C
- BS-2656 - Specification for zinc anodes, zinc oxide and zinc salts for electroplating
- BS-2657 - Specification for fluoroboric acid and metal fluoroborates for electroplating
- BS-2816 - Method for Specifying Electroplated Coatings of Silver & Silver Alloys for Engineering Pur
- BS-2868 - Specification for cadmium anodes and cadmium oxide for electroplating
- BS-3382-7 - Specification for Electroplated Coatings on Threaded Components, Thicker Platings For
- BS-3382-S-1-&-2 - Specification for Electroplated Coatings on Threaded Components, Cadmium on Steel Comp
- BS-3382-S-5-&-6 - Specification for Electroplated Coatings on Threaded Components, Tin on Copper and Coppe
- BS-3597 - Specification for electroplated coatings of 65/35 tin/nickel alloy
- BS-3745 - Method for the evaluation of results of accelerated corrosion tests on metallic coatings
- BS-4290 - Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes
- BS-4292-1 - Part 1: Gold & Gold Alloys for Engineering Purposes, Electroplated Coatings of Gold & Gold
- BS-4479-2 - Design of articles that are to be coated
- BS-4601 - Specification for Electroplated Coatings of Nickel Plus Chromium on Plastics Materials
- BS-4641 - Method for specifying electroplated coatings of chromium for engineering purposes.
- BS-4921 - Specification for sherardized coatings on iron or steel
- BS-5466-7 - Methods for corrosion testing of metallic coatings. Guidance on stationary outdoor exposure corrosion tests
- BS-622 - Specification for potassium and sodium cyanides for electroplating
- BS-6669-2 - Part 2: Adhesion Tests, Electroplated Silver & Silver Alloy Coatings
- BS-7371-11 - Coatings on metal fasteners. Specification for zinc flake non-electrolytically applied cured coatings
- BS-7371-12 - Coatings on metal fasteners. Requirements for imperial fasteners
- BS-7371-3 - Coatings on metal fasteners
- BS-7371-7 - Coatings on metal fasteners
- BS-EN-10244-1 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire
- BS-EN-10244-2 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire
- BS-EN-10244-3 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire
- BS-EN-10244-4 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire
- BS-EN-10244-5 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire
- BS-EN-10244-6 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire
- BS-EN-10318 - Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method
- BS-EN-12329 - Corrosion Protection of Metals - Electrodeposited Coatings of Zinc With Supplementary Trea
- BS-EN-12330 - Corrosion Protection of Metals - Electrodeposited Coatings of Cadmium on Iron or Steel
- BS-EN-12487 - Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
- BS-EN-12508 - Corrosion Protection of Metals & Alloys - Surface Treatment,Metallic & Other Inorganic
- BS-EN-12540 - Corrosion Protection of Metals. Electrodeposited Coatings of Nickel, Nickel Plus Chrom
- BS-EN-13143 - Metallic & Other Inorganic Coatings, Definitions & Conventions Converning Porosity
- BS-EN-13144 - Metallic and other inorganic coatings. Method for quantitative measurement of adhesion by tensile test
- BS-EN-13144-TC - Tracked Changes. Metallic and other inorganic coatings. Method for quantitative measurement of adhesion by tensile test
- BS-EN-13603 - Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- BS-EN-13603-TC - Tracked Changes. Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- BS-EN-13811 - Sherardizing. Zinc diffusion coatings on ferrous products. Specification
- BS-EN-13858 - Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
- BS-EN-1403 - Corrosion protection of metals. Electrodeposited coatings. Method of specifying general requirements
- BS-EN-14571 - Metallic coatings on nonmetallic basis materials. Measurement of coating thickness. Microresistivity method
- BS-EN-15646 - Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods
- BS-EN-15648 - Thermal spraying. Component related procedure qualification
- BS-EN-16866 - Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
- BS-EN-ISO-10111 - Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
- BS-EN-ISO-10289 - Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests
- BS-EN-ISO-10308 - Metallic coatings. Review of porosity tests
- BS-EN-ISO-10309 - Metallic coatings. Porosity tests. Ferroxyl test
- BS-EN-ISO-10683 - Fasteners. Non-electrolytically applied zinc flake coating systems
- BS-EN-ISO-10683-TC - Tracked Changes. Fasteners. Non-electrolytically applied zinc flake coating systems
- BS-EN-ISO-10684 - Fasteners. Hot dip galvanized coatings
- BS-EN-ISO-1456 - Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
- BS-EN-ISO-1461 - Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
- BS-EN-ISO-1463 - Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS-EN-ISO-14647 - Metallic coatings. Determination of porosity in gold coatings on metal substrates. Nitric acid vapour test
- BS-EN-ISO-14713-1 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures
- BS-EN-ISO-14713-1-TC - Tracked Changes. Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures
- BS-EN-ISO-14713-2 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures
- BS-EN-ISO-14713-3 - Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures
- BS-EN-ISO-15720 - Metallic coatings. Porosity tests. Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
- BS-EN-ISO-15721 - Metallic coatings. Porosity tests. Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
- BS-EN-ISO-16348 - Metallic and other inorganic coatings. Definitions and conventions concerning appearance
- BS-EN-ISO-17668 - Zinc diffusion coatings on ferrous products. Sherardizing. Specification
- BS-EN-ISO-18332 - Metallic and other inorganic coatings. Definitions and conventions concerning porosity
- BS-EN-ISO-19598 - Metallic coatings. Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
- BS-EN-ISO-2063 - Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys
- BS-EN-ISO-2063-2 - Thermal spraying. Zinc, aluminium and their alloys
- BS-EN-ISO-2064 - Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness
- BS-EN-ISO-2080 - Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary
- BS-EN-ISO-2080-TC - Tracked Changes. Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary
- BS-EN-ISO-2081 - Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
- BS-EN-ISO-2081-TC - Tracked Changes. Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
- BS-EN-ISO-2082 - Metallic and other inorganic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel
- BS-EN-ISO-2177 - Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
- BS-EN-ISO-2178 - Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
- BS-EN-ISO-2178-TC - Tracked Changes. Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
- BS-EN-ISO-2179 - Electroplated coatings of tin-nickel alloy. Specification and test methods
- BS-EN-ISO-21968 - Non-magnetic metallic coatings on metallic and non- metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
- BS-EN-ISO-26945 - Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy
- BS-EN-ISO-27830 - Metallic and other inorganic coatings. Requirements for the designation of metallic and inorganic coatings
- BS-EN-ISO-27830-TC - Tracked Changes. Metallic and other inorganic coatings. Requirements for the designation of metallic and inorganic coatings
- BS-EN-ISO-27874 - Metallic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods
- BS-EN-ISO-2819-TC - Tracked Changes. Metallic coatings on metallic substrates. Electrodeposited and chemically deposited coatings. Review of methods available for testing adhesion
- BS-EN-ISO-3497 - Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods
- BS-EN-ISO-3543 - Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method
- BS-EN-ISO-4042 - Fasteners. Electroplated coating systems
- BS-EN-ISO-4042-TC - Tracked Changes. Fasteners. Electroplated coating systems
- BS-EN-ISO-4516 - Metallic and other inorganic coatings. Vickers and Knoop microhardness tests
- BS-EN-ISO-4519 - Electrodeposited metallic coatings and related finishes. Sampling procedures for inspection by attributes
- BS-EN-ISO-4521 - Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods
- BS-EN-ISO-4524-3-TC - Tracked Changes. Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings
- BS-EN-ISO-4526 - Metallic coatings. Electroplated coatings of nickel for engineering purposes
- BS-EN-ISO-4527 - Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods
- BS-EN-ISO-6158 - Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes
- BS-EN-ISO-6158-TC - Tracked Changes. Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes
- BS-EN-ISO-8401 - Metallic coatings. Review of methods of measurement of ductility
- BS-EN-ISO-8401-TC - Tracked Changes. Metallic coatings. Review of methods of measurement of ductility
- BS-EN-ISO-9220-TC - Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
- BS-ISO-10587 - Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method
- BS-ISO-12686 - Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
- BS-ISO-1456 - Metallic Coatings, Electrodeposited Coatings of Nickel Pluschromium & of Copper Plus
- BS-ISO-14571 - Metallic coatings on non-metallic basis materials. Measurement of coating thickness. Micro-resistivity method
- BS-ISO-1458 - Metallic Coatings, Electrodeposited Coatings of Nickel
- BS-ISO-14647 - Metallic coatings. Determination of porosity on gold coatings on metallic substrates. Nitric acid vapour test
- BS-ISO-15726 - Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron
- BS-ISO-16866 - Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
- BS-ISO-17334 - Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
- BS-ISO-18332 - Metallic and other inorganic coatings. Definitions and conventions concerning porosity
- BS-ISO-19487 - Metallic and other inorganic coatings. Electrodeposited nickel-ceramics composite coatings
- BS-ISO-2080 - Metallic and Other Inorganic Coatings, Surface Treatment, Metallic and Other Inorganic Coatings, Vocabulary
- BS-ISO-21164 - Metallic and other inorganic coatings. DC magnetron sputtered silver coatings for engineering purposes. Measurement of coating adhesion
- BS-ISO-21874 - PVD multi-layer hard coatings. Composition, structure and properties
- BS-ISO-22680 - Metallic and other inorganic coatings. Measurement of the linear thermal expansion coefficient of thermal barrier coatings
- BS-ISO-22778 - Metallic coatings. Physical vapour-deposited coatings of cadmium on iron and steel. Specification and test methods
- BS-ISO-22779 - Metallic coatings. Physical vapour-deposited coatings of aluminium. Specification and test methods
- BS-ISO-23363 - Electrodeposited coatings and related finishes. Electroless Ni-P-ceramic composite coatings
- BS-ISO-23486 - Metallic and other inorganic coatings. Measurement of Youngs modulus of thermal barrier coatings at elevated temperature by flexural resonance method
- BS-ISO-24284 - Metallic coatings. Corrosion test method for decorative chrome plating under a de-icing salt environment
- BS-ISO-24674 - Method and requirement of plasma nitriding and follow-up PVD hard coatings on cold-work mould steels
- BS-ISO-26945 - Metallic & Other Inorganic Coatings, Electrodeposited Coatings of Tin-Cobalt Alloy
- BS-ISO-27830 - Metallic & Other Inorganic Coatings, Guidelines for Specifying Metallic & Inorganic Co
- BS-ISO-27831-1 - Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces
- BS-ISO-27831-2 - Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces
- BS-ISO-4289 - High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components. Guidance with requirements
- BS-ISO-4524-2 - Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings
- BS-ISO-4525 - Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials
- BS-ISO-5154 - Decorative metallic coatings for radio wave transmissive application products. Designation and characterization method
- BS-ISO-7989-1 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire
- BS-ISO-7989-2 - Steel wire and wire products. Non-ferrous metallic coatings on steel wire
- BS-ISO-9587 - Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
- BS-ISO-9588 - Metallic and other inorganic coatings. Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
- ISO-14571 - Metallic coatings on non-metallic basis materials - Measurement of coating thickness - Micro-resistivity method
- ISO-16866 - Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
- ISO-22680 - Metallic and other inorganic coatings - Measurement of the linear thermal expansion coefficient of thermal barrier coatings
ISO:
- ISO-10111 - Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
- ISO-10289 - Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests
- ISO-10308 - Metallic coatings - Review of porosity tests
- ISO-10309 - Metallic coatings - Porosity tests - Ferroxyl test
- ISO-10587 - Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method
- ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coating systems
- ISO-10684 - Fasteners - Hot dip galvanized coatings
- ISO-12683 - Mechanically deposited coatings of zinc - Specification and test methods
- ISO-12686 - Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
- ISO-12687 - Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test
- ISO-1456 - Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
- ISO-1458 - Metallic coatings - Electrodeposited coatings of nickel
- ISO-1460 - Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
- ISO-1461 - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
- ISO-1463 - Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- ISO-14647 - Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test
- ISO-14713 - Protection against corrosion of iron and steel in structures -- Zinc and aluminium coatings - Guidelines
- ISO-14713-1 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance
- ISO-14713-2 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing
- ISO-14713-3 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing
- ISO-15720 - Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
- ISO-15721 - Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
- ISO-15724 - Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method
- ISO-15726 - Metallic and other inorganic coatings - Electrodeposited zinc alloys with nickel, cobalt or iron
- ISO-15922 - Metallic and other inorganic coatings - Evaluation of properties of dark-stain phenomenon of chromated coiled or sheet product
- ISO-16348 - Metallic and other inorganic coatings - Definitions and conventions concerning appearance
- ISO-17334 - Metallic and other inorganic coatings - Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
- ISO-17668 - Zinc diffusion coatings on ferrous products - Sherardizing - Specification
- ISO-17925 - Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
- ISO-18332 - Metallic and other inorganic coatings - Definitions and conventions concerning porosity
- ISO-19477 - Metallic and other inorganic coatings - Measurement of Youngs modulus of thermal barrier coatings by beam bending
- ISO-19487 - Metallic and other inorganic coatings - Electrodeposited nickel-ceramics composite coatings
- ISO-19598 - Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
- ISO-2063 - Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys
- ISO-2063-1 - Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems
- ISO-2063-2 - Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems
- ISO-2064 - Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness
- ISO-2079 - Surface treatment and metallic coatings - General classification of terms
- ISO-2080 - Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
- ISO-2081 - Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel
- ISO-2082 - Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel
- ISO-2093 - Electroplated coatings of tin - Specification and test methods
- ISO-21164 - Metallic and other inorganic coatings - DC magnetron sputtered silver coatings for engineering purposes - Measurement of coating adhesion
- ISO-2177 - Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
- ISO-2178 - Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
- ISO-2179 - Electroplated coatings of tin-nickel alloy - Specification and test methods
- ISO-21874 - PVD multi-layer hard coatings - Composition, structure and properties
- ISO-21968 - Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
- ISO-22778 - Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods
- ISO-22779 - Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods
- ISO-23363 - Electrodeposited coatings and related finishes - Electroless Ni-P-ceramic composite coatings
- ISO-23486 - Metallic and other inorganic coatings - Measurement of Young.s modulus of thermal barrier coatings at elevated temperature by flexural resonance method
- ISO-2361 - Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method
- ISO-24284 - Metallic coatings - Corrosion test method for decorative chrome plating under a de-icing salt environment
- ISO-26945 - Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy
- ISO-27830 - Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings
- ISO-27831-1 - Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 1: Ferrous metals and alloys
- ISO-27831-2 - Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 2: Non-ferrous metals and alloys
- ISO-27874 - Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods
- ISO-2819 - Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
- ISO-3497 - Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
- ISO-3543 - Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
- ISO-3868 - Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
- ISO-3882 - Metallic and other inorganic coatings - Review of methods of measurement of thickness
- ISO-4289 - High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components - Guidance with requirements
- ISO-4516 - Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
- ISO-4518 - Metallic coatings - Measurement of coating thickness - Profilometric method
- ISO-4519 - Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
- ISO-4521 - Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods
- ISO-4522-1 - Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings - Part 1 : Determination of coating thickness
- ISO-4522-2 - Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings - Part 2 : Adhesion tests
- ISO-4522-3 - Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings - Part 3: Determination of the presence of residual salts
- ISO-4523 - Metallic coatings - Electrodeposited gold and gold alloy coatings for engineering purposes
- ISO-4524-1 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 1 : Determination of coating thickness
- ISO-4524-2 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Mixed flowing gas (MFG) environmental tests
- ISO-4524-3 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity
- ISO-4524-4 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 4 : Determination of gold content
- ISO-4524-5 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 5 : Adhesion tests
- ISO-4524-6 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6 : Determination of the presence of residual salts
- ISO-4525 - Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials
- ISO-4526 - Metallic coatings - Electroplated coatings of nickel for engineering purposes
- ISO-4527 - Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods
- ISO-4536 - Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test)
- ISO-4538 - Metallic coatings - Thioacetamide corrosion test (TAA test)
- ISO-4539 - Electrodeposited chromium coatings - Electrolytic corrosion testing (EC test)
- ISO-4541 - Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test)
- ISO-4543 - Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions
- ISO-5154 - Decorative metallic coatings for radio wave transmissive application products - Designation and characterization method
- ISO-6158 - Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes
- ISO-6988 - Metallic and other non organic coatings - Sulfur dioxide test with general condensation of moisture
- ISO-7582 - Metallic coatings for electromagnetic interference shielding - Designation and characterization method
- ISO-7587 - Electroplated coatings of tin-lead alloys - Specification and test methods
- ISO-7989 - Zinc coatings for steel wire
- ISO-7989-1 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
- ISO-7989-2 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc-alloy coating
- ISO-8401 - Metallic coatings - Review of methods of measurement of ductility
- ISO-8403 - Metallic coatings -- Coatings anodic to the substrate -- Rating of test specimens subjected to corrosion tests
- ISO-9220 - Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
- ISO-9587 - Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
- ISO-9588 - Metallic and other inorganic coatings - Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
Other SDOs:
- BS-EN-ISO-2063-1 - Thermal spraying. Zinc, aluminium and their alloys
- DIN-50958 - Electroplated coatings - Modified corrodkote corrosion test (mod. CORR-Test)
- DIN-EN-10318 - Determination of Thickness & Chemical Composition of Zinc- ALUMINIUM-Based Metallic Co
- DIN-EN-13603 - Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2013
- DIN-EN-13811 - Sherardizing - Zinc diffusion coatings on ferrous products - Specification; German version EN 13811:2003
- DIN-EN-14571 - Metallic Coatings on Non-Metallic Basis Materials, Measurement of Coating Thickness -
- DIN-EN-ISO-10308 - Metallic Coatings - Review of Porosity Tests
- DIN-EN-ISO-10684 - Fasteners - Hot dip galvanized coatings
- DIN-EN-ISO-12683 - Mechanically Deposited Coatings of Zinc, Specification & Test Methods
- DIN-EN-ISO-3543 - Metallic & Non-Metallic Coatings, Measurement of Thickness - Beta Backscatter Method
- DIN-EN-ISO-4516 - Metallic & Other Inorganic Coatings, Vickers & Knoop Microhardness Tests
- DIN-EN-ISO-4526 - Metallic Coatings, Electroplated Coatings of Nickel for Engineering Purposes
- DIN-EN-ISO-6158 - Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes
- DIN-EN-ISO-8403 - Metallic coatings - Coatings anodic to the specimens subjected to corrosion tests (ISO 8403:1991); German version EN ISO 8403:1995
- EN-10244-1 - Part 1: General Principles, Steel Wire & Wire Products - Non-Ferrous Metallic Coatings
- EN-10318 - Determination of Thickness & Chemical Composition of Zinc- & ALUMINIUM-Based Metallic
- EN-12487 - Corrosion Protection of Metals, Rinsed & Non-Rinsed Chromate Conversion Coatings on Al
- EN-13509 - Cathodic Protection Measurement Techniques
- EN-13603 - Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- EN-13811 - Sherardizing, Zinc Diffusion Coatings on Ferrous Products, Specification
- EN-13858 - Corrosion Protection of Metals, Non-Electrolytically Applied Zinc Flake Coatings on Ir
- EN-14571 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
- EN-15646 - Electrodeposited Coatings - Electroplated Coatings of Aluminium & Aluminium Alloys Wit
- EN-15648 - Thermal Spraying - Component Related Procedure Qualification
- EN-16866 - Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
- EN-ISO-10308 - Metallic Coatings - Review of Porosity Tests
- EN-ISO-10309 - Metallic coatings - Porosity tests - Ferroxyl test
- EN-ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
- EN-ISO-10684 - Fasteners - Hot dip galvanized coatings
- EN-ISO-12683 - Mechanically Deposited Coatings of Zinc, Specification & Test Methods
- EN-ISO-1456 - Metallic & Other Inorganic Coatings - Electrodeposited Coatings of Nickel, Nickel Plus
- EN-ISO-1461 - Hot Dip Galvanized Coatings on Fabricated Iron & Steel Articles - Specifications & Tes
- EN-ISO-14647 - Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test
- EN-ISO-14713-1 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance
- EN-ISO-14713-2 - Part 2: Hot Dip Galvanizing, Zinc Coatings - Guidelines and Recommendations for the Prot
- EN-ISO-14713-3 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing
- EN-ISO-17668 - Zinc diffusion coatings on ferrous products - Sherardizing - Specification
- EN-ISO-18332 - Metallic & Other Inorganic Coatings, Definitions & Conventions Conerning Porosity
- EN-ISO-19598 - Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
- EN-ISO-2063-1 - Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems
- EN-ISO-2063-2 - Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems
- EN-ISO-2080 - Metallic & Other Inorganic Coatings, Surface Treatment, Metallic & Other Inorganic Coa
- EN-ISO-2081 - Metallic & Other Inorganic Coatings - Electroplated Coatings of Zinc With Supplementar
- EN-ISO-2082 - Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel
- EN-ISO-2178 - Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
- EN-ISO-2179 - Electroplated coatings of tin-nickel alloy - Specification and test methods
- EN-ISO-21968 - Non-Magnetic Metallic Coatings on Metallic & Non-Metallic Basis Materials, Measurement
- EN-ISO-26945 - Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy
- EN-ISO-27830 - Metallic and other inorganic coatings - Guidelines for specifying metallic and inorganic coatings (ISO 27830:2008)
- EN-ISO-27874 - Metallic Coatings, Electrodeposited Gold & Gold Alloy Coatings for Electrical, Electro
- EN-ISO-2819 - Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
- EN-ISO-3543 - Metallic & Non-Metallic Coatings, Measurement of Thickness -Beta Backscatter Method
- EN-ISO-4516 - Metallic & Other Inorganic Coatings, Vickers & Knoop Microhardness Tests
- EN-ISO-4519 - Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
- EN-ISO-4521 - Metallic & Other Inorganic Coatings - Electrodeposited Silver & Silver Alloy Coatings
- EN-ISO-4526 - Metallic Coatings, Electroplated Coatings of Nickel for Engineering Purposes
- EN-ISO-4527 - Metallic Coatings, Autocatalytic (Electroless) Nickel-Phosphorus Alloy Coatings, Speci
- EN-ISO-6158 - Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes
- JIS-B-1044 - Fasteners -- Electroplated coatings
- JIS-B-1046 - Fasteners -- Non-electrolytically applied zinc flake coatings
- JIS-G-3303 - Tinplate and blackplate
- JIS-H-0400 - Glossary of terms used in electroplating and related processes
- JIS-H-8501 - Methods of thickness test for metallic coatings
- JIS-H-8502 - Methods of corrosion resistance test for metallic coatings
- JIS-H-8504 - Methods of adhesion test for metallic coatings
- JIS-H-8610 - Electroplated coatings of zinc on iron or steel
- JIS-H-8611 - Electroplated coatings of cadmium on iron or steel
- JIS-H-8617 - Electroplated coatings of nickel and chromium
- JIS-H-8619 - Electroplated coatings of tin
- JIS-H-8620 - Electroplated coatings of gold and gold alloy for engineering purposes
- JIS-H-8621 - Electroplated coatings of silver for engineering purposes
- JIS-H-8624 - Electroplated coatings of Tin-Lead alloys
- JIS-H-8641 - Hot dip galvanized coatings
- JIS-H-8645 - Autocatalytic nickel-phosphorus coatings on metals
- JIS-H-8684 - Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
- JIS-H-9124 - Recommended Practice for Zinc Coating (Hot-Dipped)
- SS-2392 - Inorganic coatings - Determination of free hexavalent chromium in chromate conversion coatings
- SS-3192 - Metallic and other non-organic coatings - Hot dipzinc coated threaded components of steel
- SS-3583 - Inorganic coatings - General hot dip galvanizing - Guiding principles and requirements
- SS-EN-10240 - Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanizedcoatings
- SS-EN-10244-1 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
- SS-EN-10244-2 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
- SS-EN-10318 - Determination of thickness and chemical composition of zinc-based metallic coatings - Routine method
- SS-EN-12329 - Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel
- SS-EN-12330 - Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel
- SS-EN-12487 - Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
- SS-EN-12508 - Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary
- SS-EN-12540 - Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
- SS-EN-13143 - Metallic and other inorganic coatings - Definitions and conventions concerning porosity
- SS-EN-13144 - Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
- SS-EN-13509 - Cathodic protection measurement techniques
- SS-EN-13603 - Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- SS-EN-13811 - Sheradizing - Zinc diffusion coatings on ferrous products - Specification
- SS-EN-13858 - Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
- SS-EN-1403 - Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements
- SS-EN-14571 - Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method
- SS-EN-15646 - Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods
- SS-EN-15648 - Thermal spraying - Component related procedure qualification
- SS-EN-16866 - Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
- SS-EN-22063 - Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys (ISO 2063:1991 modified)
- SS-EN-30-1-1 - Domestic cooking appliances burning gas - Part 1-1: Safety - General
- SS-EN-582 - Thermal spraying - Determination of tensile adhesive strength
- SS-EN-657 - Thermal spraying - Terminology, classification
- SS-EN-ISO-10111 - Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
- SS-EN-ISO-10289 - Methods for corrosion testing of metallic and other inorganic coatings on metallics substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999)
- SS-EN-ISO-10308 - Metallic coatings - Review of porosity tests (ISO 10308:2006)
- SS-EN-ISO-10309 - Metallic coatings - Porosity tests - Ferroxyl test (ISO 10309:1994)
- SS-EN-ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2018)
- SS-EN-ISO-10684 - Fasteners - Hot dip galvanized coatings (ISO 10684:2004)
- SS-EN-ISO-12567-1 - Thermal performance of windows and doors - Determination of thermal transmittance by hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
- SS-EN-ISO-12683 - Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)
- SS-EN-ISO-12687 - Metallic coatings - Porosity tests - Humid sulfur(flowers or sulfur) test (ISO 12687:1996)
- SS-EN-ISO-1456 - Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
- SS-EN-ISO-14571 - Metallic coatings on non-metallic basis materials - Measurement of coating thickness - Micro-resistivity method (ISO 14571:2020)
- SS-EN-ISO-1460 - Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
- SS-EN-ISO-1461 - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2022)
- SS-EN-ISO-1463 - Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- SS-EN-ISO-14647 - Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test (ISO 14647:2000)
- SS-EN-ISO-14713-1 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
- SS-EN-ISO-14713-2 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2019)
- SS-EN-ISO-14713-3 - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017)
- SS-EN-ISO-14916 - Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
- SS-EN-ISO-15720 - Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)
- SS-EN-ISO-15721 - Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001)
- SS-EN-ISO-16348 - Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003)
- SS-EN-ISO-16866 - Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) (ISO 16866:2020)
- SS-EN-ISO-17668 - Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016)
- SS-EN-ISO-18332 - Metallic and other inorganic coatings - Definitions and conventions concerning porosity (ISO 18332:2007)
- SS-EN-ISO-19598 - Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016)
- SS-EN-ISO-2063-1 - Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
- SS-EN-ISO-2063-2 - Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
- SS-EN-ISO-2064 - Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996)
- SS-EN-ISO-2080 - Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2022)
- SS-EN-ISO-2081 - Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008)
- SS-EN-ISO-2082 - Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)
- SS-EN-ISO-2177 - Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003)
- SS-EN-ISO-2178 - Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016)
- SS-EN-ISO-2179 - Electroplated coatings of tin-nickel alloy - Specification and test methods (ISO 2179:1986)
- SS-EN-ISO-21968 - Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
- SS-EN-ISO-22479 - Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
- SS-EN-ISO-26945 - Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011)
- SS-EN-ISO-27830 - Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
- SS-EN-ISO-27874 - Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008)
- SS-EN-ISO-2819 - Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:2017)
- SS-EN-ISO-3231 - Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
- SS-EN-ISO-3497 - Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000)
- SS-EN-ISO-3543 - Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000)
- SS-EN-ISO-3882 - Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)
- SS-EN-ISO-4042 - Fasteners - Electroplated coating systems (ISO 4042:2022)
- SS-EN-ISO-4516 - Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002)
- SS-EN-ISO-4518 - Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
- SS-EN-ISO-4519 - Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes (ISO 4519:1980)
- SS-EN-ISO-4521 - Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008)
- SS-EN-ISO-4524-3 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:2021)
- SS-EN-ISO-4524-6 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988)
- SS-EN-ISO-4526 - Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004)
- SS-EN-ISO-4527 - Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003)
- SS-EN-ISO-4540 - Metallic coatings - Coatings cathodic to the substrate - Rating of electroplated test specimens subjected to corrosion tests (ISO 4540:1980)
- SS-EN-ISO-4541 - Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978)
- SS-EN-ISO-4543 - Metallic and other non-organic coatings - Generalrules for corrosion tests applicable for storage conditions (ISO 4543:1981)
- SS-EN-ISO-6158 - Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2018)
- SS-EN-ISO-6988 - Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture(ISO 6988:1984)
- SS-EN-ISO-8401 - Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017)
- SS-EN-ISO-9220 - Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
- SS-ISO-10289 - Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
- SS-ISO-10587 - Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method
- SS-ISO-1456 - Metallic coatings - Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium
- SS-ISO-1457 - Metallic coatings - Electroplated coatings of copper plus nickel plus chromium on iron or steel
- SS-ISO-1458 - Metallic coatings - Electrodeposited coatings of nickel
- SS-ISO-14647 - Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test
- SS-ISO-1726 - Road vehicles - Mechanical coupling between tractors and semi-trailers - Interchangeability (ISO 1726:2000, IDT)
- SS-ISO-2079 - Surface treatment and metallic coatings - Generalclassification of terms
- SS-ISO-2081 - Metallic coatings - Electroplated coatings of zinc on iron or steel
- SS-ISO-2082 - Metallic coatings - Electroplated coatings of cadmium on iron or steel
- SS-ISO-2093 - Electroplated coating of tin - Specification and test methods
- SS-ISO-2179 - Electroplated coatings of tin-nickel alloy - Specification and test methods
- SS-ISO-27831-1 - Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 1: Ferrous metals and alloys (ISO 27831-1:2008, IDT)
- SS-ISO-27831-2 - Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 2: Non-ferrous metals and alloys (ISO 27831-2:2008, IDT)
- SS-ISO-2819 - Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
- SS-ISO-4519 - Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
- SS-ISO-4521 - Metallic coatings - Electrodeposited silver and silver alloys for engineering purposes
- SS-ISO-4522-1 - Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings - Part 1: Determination of coating thickness
- SS-ISO-4522-2 - Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings - Part 2: Adhesion tests
- SS-ISO-4522-3 - Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings - Part 3: Determination of the presence of residual salts
- SS-ISO-4523 - Metallic coatings - Electrodeposited gold and gold alloy coatings for engineering purposes
- SS-ISO-4524-1 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 1: Determination of coating thickness
- SS-ISO-4524-2 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Environmental tests
- SS-ISO-4524-3 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity
- SS-ISO-4524-4 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 4: Determination of gold content
- SS-ISO-4524-5 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 5: Adhesion tests
- SS-ISO-4524-6 - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts
- SS-ISO-4525 - Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials
- SS-ISO-4526 - Metallic coatings - Electroplated coatings of nickel for engineering purposes
- SS-ISO-4527 - Autocatalytic nickel-phosphorus coatings - Specification and test methods
- SS-ISO-4536 - Metallic and other non-organic coatings on metallic substrates - Saline droplets corrosion test (SD-test)
- SS-ISO-4539 - Electrodeposited chromium coatings - Electrolyticcorrosion testing (EC test)
- SS-ISO-4540 - Metallic coatings - Coatings cathodic to the substrate - Rating of electroplated test specimens subjected to corrosion tests
- SS-ISO-4541 - Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test)
- SS-ISO-4542 - Metallic and other non-organic coatings - Generalrules for stationary outdoor exposure corrosion tests
- SS-ISO-4543 - Metallic and other non-organic coatings - Generalrules for corrosion tests applicable for storage conditions
- SS-ISO-4892-4 - Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps (ISO 4892-4:2004, IDT)
- SS-ISO-6158 - Metallic coatings - Electroplated coatings of chromium for engineering purposes
- SS-ISO-7587 - Electroplated coatings of tin-lead alloys - Specification and test methods
- SS-ISO-8403 - Metallic coatings - Coatings anodic to the substrate - Rating of test specimens subjected to corrosion tests
- SS-ISO-9587 - Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement (ISO 9587:2007, IDT)
- SS-ISO-9588 - Metallic and other inorganic coatings - Post-coating treatment of iron or steel to reduce the risk of hydrogen embrittlement (ISO 9588:2007, IDT)
- UNE-EN-ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coatings
- UNE-EN-ISO-19598 - Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
- UNE-ISO-4538 - Metallic coatings - Thioacetamide corrosion test (TAA test)