Document Center List of Standards on Quality Management And Quality Assurance
ICS Code 03.120.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1188 - Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities (Withdrawn 2017)
- ASTM-C1210 - Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
- ASTM-D5283 - Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
- ASTM-D5339 - Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005)
- ASTM-D6328 - Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
- ASTM-D6809 - Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
- ASTM-E1267 - Guide for ASTM Standard Specification Quality Statements (Withdrawn 1996)
- ASTM-E1323 - Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
- ASTM-E1884 - Standard Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems (Withdrawn 2004)
- ASTM-E2119 - Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
- ASTM-E2537 - Standard Guide for Application of Continuous Process Verification to Pharmaceutical and Biopharmaceutical Manufacturing
- ASTM-E2554 - Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
- ASTM-E2696 - Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
- ASTM-E2936 - Standard Guide for Contractor Self-Assessment for U.S. Government Asset Management Systems
- ASTM-E543 - Standard Specification for Agencies Performing Nondestructive Testing
- ASTM-F1423 - Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers (Withdrawn 2017)
- ASTM-F2016 - Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
- ASTM-F2839 - Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
- ASTM-F3205 - Standard Practice for Independent Audit Program for Light Aircraft Manufacturers
- ASTM-F3246 - Standard Specification for Quality Assurance for Manufacturers of Aircraft Systems
BSI:
- BIP-0104 - ISO 9001:2000. The Quality Management Process
- BIP-0115 - Implementing an ISO 13485 Quality Management System for Medical Devices
- BIP-0131 - TickITplus Base Process Library Version 1.1.3 Word Edition on CD
- BIP-0140 - Understanding the new ISO Management System Requirements
- BIP-2006 - Auditing the ISO 19011 Way
- BIP-2013 - Understanding ISO 9001:2008 and process-based management systems (Second Edition)
- BIP-2014 - Creating a process-based management system for ISO 9001:2008 and beyond (Second Edition)
- BIP-2015 - Process management auditing for ISO 9001:2008 (Second Edition)
- BIP-2019 - Handbook of quality management
- BIP-2020 - The business improvement handbook
- BIP-2034 - Disaster and emergency management systems
- BIP-2039-QMS SET - Quality Management, Achieving Registration
- BIP-2070 - Environmental management systems presentation set
- BIP-2071 - Medical devices: ISO 13485 and ISO 9001
- BIP-2072 - Quality of care in residential homes for the elderly
- BIP-2073 - Quality patient care in hospitals
- BIP-2077 - ISO-22000, the Case for an International Standard
- BIP-2078 - Managing food safety the 22000 way
- BIP-2087 - SMMT kit. Guides for business improvement
- BIP-2189 - Quality service, competitive business. Setting the standard in customer service
- BIP-2206 - Quality in market research from theory to practice
- BIP-2208 - Customer services collection. Quality service, competitive business, and the standards BS 8477, BS ISO 10001 and BS ISO 10002
- BIP-2211 - Complaints management. Turning negatives into positives
- BIP-2222 - Complaints management. Turning negatives into positives (including BS ISO 10002:2004 and BS ISO 10003:2007)
- BIP-3023 - Environmental management systems presentation set CD-ROM
- BIP-3026 - Introducing the tools for continuous improvement - DVD & CD
- BIP-3027 - Gorilla in the midst. Auditing to add value - Video & CD
- BIP-3028 - Gorilla in the midst. Auditing to add value - DVD & CD
- BIP-3029 - Connor, the ISO 9001:2000 Road Movie, Leadership Skills for Customer Satisfaction - V
- BIP-3030 - Connor, the ISO 9001: 2000 Road Movie, Leadership Skills for Customer Satisfaction - D
- BIP-3058 - The power of process auditing - DVD & CD
- BIP-3092 - The ISO 9000 standards collection. Quality management systems
- BPL GUIDANCE, TICKIT - BPL Guidance, TickITplus
- BPL TICKITPLUS VERSI - Base Process Library (BPL) Version 1.1.3, TickITplus
- BS-5750-14 - Quality systems. Guide to dependability programme management
- BS-5750-8 - Quality systems. Guide to quality management and quality systems elements for services
- BS-5760-4 - Reliability of Systems, Equipment & Components, Guide To the Specification of Dependab
- BS-5781-2 - Quality assurance requirements for measuring equipment
- BS-6143 - Guide to the determination and use of quality related costs
- BS-6143-1 - Guide to the economics of quality. Process cost model
- BS-6143-2 - Guide to the economics of quality. Prevention, appraisal and failure model
- BS-7520 - Guide To Quality Assurance Plans for Tools for Live Working
- BS-7850-1 - Total quality management. Guide to management principles
- BS-7850-2 - Total quality management. Guidelines for quality improvement
- BS-8543 - Complaint handling in organizations. Specification
- BS-99001 - Quality management systems. Specification for the application of BS EN ISO 9001:2015 in the built environment sector
- BS-EN-12408 - Safety requirements for cableways installations designed to carry person. Quality control
- BS-EN-12507 - Transportation services. Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries
- BS-EN-12798 - Transport quality management system. Road rail and inland navigation transport. Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods, with regard to safety
- BS-EN-13980 - Potentially Explosive Atmospheres - Application of Quality Systems
- BS-EN-14969 - Railway applications. Track. Qualification system for railway trackwork contractors
- BS-EN-15224 - Quality management systems. EN ISO 9001:2015 for healthcare
- BS-EN-16224 - Healthcare provision by chiropractors
- BS-EN-16247-1 - Energy audits
- BS-EN-16247-1-TC - Tracked Changes. Energy audits
- BS-EN-16247-2 - Energy audits
- BS-EN-16247-2-TC - Tracked Changes. Energy audits
- BS-EN-16247-3 - Energy audits
- BS-EN-16247-4 - Energy audits
- BS-EN-16247-4-TC - Tracked Changes. Energy audits
- BS-EN-16247-5 - Energy audits
- BS-EN-16679 - Packaging. Tamper verification features for medicinal product packaging
- BS-EN-2000 - Quality assurance. EN aerospace products. Approval of the quality system of manufacturers
- BS-EN-3042 - Quality Assurance - En Aerospace Products - Qualification Procedure
- BS-EN-46003 - Quality systems. Medical devices. Particular requirements for the application of EN ISO 9003
- BS-EN-50103 - Guidance on the Application of En 29001 & En 46001 & of En 29002 & En 46002 for the Active
- BS-EN-61318 - Live working. Conformity assessment applicable to tools, devices and equipment
- BS-EN-61703 - Mathematical expressions for reliability, availability, maintainability and maintenance support terms
- BS-EN-9100 - Quality Management Systems. Requirements for Aviation, Space and Defence Organizations
- BS-EN-9100-TC - Tracked Changes. Quality Management Systems. Requirements for Aviation, Space and Defence Organizations
- BS-EN-9101-TC - Tracked Changes. Quality Management Systems. Audit Requirements for Aviation, Space, and Defence Organisations
- BS-EN-9102 - Aerospace series. Quality systems. First article inspection requirements
- BS-EN-9102-TC - Tracked Changes. Aerospace series. Quality systems. First article inspection requirements
- BS-EN-9103 - Aerospace series. Quality management systems. Variation management of key characteristics
- BS-EN-9103-TC - Tracked Changes. Aerospace series. Quality management systems. Variation management of key characteristics
- BS-EN-9104 - Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs
- BS-EN-9104-001 - Aerospace series. Quality management systems
- BS-EN-9104-002 - Aerospace series. Quality management systems
- BS-EN-9104-002-TC - Tracked Changes. Aerospace series. Quality management systems
- BS-EN-9104-003 - Aerospace series. Quality management systems
- BS-EN-9104-1 - Aerospace series. Quality management systems
- BS-EN-9104-1-TC - Tracked Changes. Aerospace series. Quality management systems
- BS-EN-9104-3 - Aerospace series. Quality management systems
- BS-EN-9107 - Aerospace series. Quality systems. Direct Delivery Authorization. Guidance for Aerospace Companies
- BS-EN-9110 - Quality Management Systems. Requirements for Aviation Maintenance Organizations
- BS-EN-9110-TC - Tracked Changes. Quality Management Systems. Requirements for Aviation Maintenance Organizations
- BS-EN-9111 - Aerospace series. Quality management systems. Assessment applicable to maintenance organizations
- BS-EN-9114 - Aerospace series. Quality systems. Direct Ship. Guidance for aerospace companies
- BS-EN-9114-TC - Tracked Changes. Aerospace series. Quality systems. Direct Ship. Guidance for aerospace companies
- BS-EN-9115 - Quality Management Systems. Requirements for Aviation, Space and Defense Organizations. Deliverable Software (Supplement to EN 9100)
- BS-EN-9115-TC - Tracked Changes. Quality Management Systems. Requirements for Aviation, Space and Defense Organizations. Deliverable Software (Supplement to EN 9100)
- BS-EN-9120 - Quality Management Systems. Requirements for Aviation, Space and Defence Distributors
- BS-EN-9121 - Aerospace series. Quality management systems. Assessment applicable to stockist distributors
- BS-EN-9130 - Aerospace series. Quality systems. Record retention
- BS-EN-9131 - Aerospace series. Quality Management Systems. Nonconformance Data Definition and Documentation
- BS-EN-9132 - Aerospace series. Quality management systems. Data Matrix Quality Requirements for Parts Marking
- BS-EN-9133 - Aerospace series. Quality Management System. Qualification Procedure for Aerospace Standard Products
- BS-EN-9133-TC - Tracked Changes. Aerospace series. Quality Management System. Qualification Procedure for Aerospace Standard Products
- BS-EN-9136 - Aerospace series. Root cause analysis and problem solving (9S Methodology)
- BS-EN-9137 - Quality management systems. Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
- BS-EN-9138 - Aerospace Series. Quality Management Systems. Statistical Product. Acceptance Requirements
- BS-EN-9145 - Aerospace series. Requirements for Advanced Product Quality Planning and Production Part Approval Process
- BS-EN-9162 - Aerospace series. Aerospace Operator Self-Verification Programs
- BS-EN-9721 - Aerospace series. General recommendation for the BIT Architecture in an integrated system
- BS-EN-IEC-61318 - Live working. Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
- BS-EN-IEC-61318-TC - Tracked Changes. Live working. Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
- BS-EN-ISO-10007 - Quality Management, Guidelines for Configuration Management
- BS-EN-ISO-10012 - Measurement management systems. Requirements for measurement processes and measuring equipment
- BS-EN-ISO-13485 - Medical devices. Quality management systems. Requirements for regulatory purposes
- BS-EN-ISO-13488 - Quality systems. Medical devices. Particular requirements for the application of EN ISO 9002
- BS-EN-ISO-15189 - Medical laboratories. Requirements for quality and competence
- BS-EN-ISO-15378 - Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
- BS-EN-ISO-15378-TC - Tracked Changes. Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
- BS-EN-ISO-19011 - Guidelines for auditing management systems
- BS-EN-ISO-19011 (A5 - Guidelines for auditing management systems
- BS-EN-ISO-19443 - Quality management systems. Specific requirements for the application of ISO9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety(ITNS)
- BS-EN-ISO-22000-TC - Tracked Changes. Food safety management systems. Requirements for any organization in the food chain
- BS-EN-ISO-22870 - Point-of-care testing (POCT). Requirements for quality and competence
- BS-EN-ISO-22870-TC - Tracked Changes. Point-of-care testing (POCT). Requirements for quality and competence
- BS-EN-ISO-29001 - Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations
- BS-EN-ISO-9000 - Quality management systems. Fundamentals and vocabulary
- BS-EN-ISO-9000-TC - Tracked Changes. Quality management systems. Fundamentals and vocabulary
- BS-EN-ISO-9001 - Quality management systems. Requirements
- BS-EN-ISO-9001 A5 LA - Quality management systems. Requirements
- BS-EN-ISO-9001 LL - Quality management systems. Requirements
- BS-EN-ISO-9001-TC - Tracked Changes. Quality management systems. Requirements
- BS-EN-ISO-9002 - Quality systems. Model for quality assurance in production, installation and servicing
- BS-EN-ISO-9004 - Quality management. Quality of an organization. Guidance to achieve sustained success
- BS-EN-ISO-9004-TC - Tracked Changes. Quality management. Quality of an organization. Guidance to achieve sustained success
- BS-EN-ISO/IEC-80079-34 - Explosive atmospheres
- BS-EN-ISO/IEC-80079-34 EXPERT COM - Expert Commentary for BS EN ISO/IEC 80079‑34:2020. Explosive atmospheres. Application of quality systems for ex product manufacture
- BS-EN-ISO/IEC-80079-34-TC - Tracked Changes. Explosive atmospheres
- BS-IEC-60300-3-1 - Dependability management. Application guide. Analysis techniques for dependability. Guide on methodology
- BS-IEC-60300-3-10 - Dependability management. Application guide
- BSI-QUALITY MANAGEM - The little book of Quality Management for small businesses
- BS-ISO-10001 - Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations
- BS-ISO-10001-TC - Tracked Changes. Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations
- BS-ISO-10002 - Quality management. Customer satisfaction. Guidelines for complaints handling in organizations
- BS-ISO-10002-TC - Tracked Changes. Quality management. Customer satisfaction. Guidelines for complaints handling in organizations
- BS-ISO-10003 - Quality management. Customer satisfaction. Guidelines for dispute resolution external to organizations
- BS-ISO-10003-TC - Tracked Changes. Quality management. Customer satisfaction. Guidelines for dispute resolution external to organizations
- BS-ISO-10004 - Quality management. Customer satisfaction. Guidelines for monitoring and measuring
- BS-ISO-10004-TC - Tracked Changes. Quality management. Customer satisfaction. Guidelines for monitoring and measuring
- BS-ISO-10005 - Quality management. Guidelines for quality plans
- BS-ISO-10005-TC - Tracked Changes. Quality management. Guidelines for quality plans
- BS-ISO-10006 - Quality management. Guidelines for quality management in projects
- BS-ISO-10007 - Quality management. Guidelines for configuration management
- BS-ISO-10007-TC - Tracked Changes. Quality management. Guidelines for configuration management
- BS-ISO-10008 - Quality management. Customer satisfaction. Guidance for business-to-consumer electronic commerce transactions
- BS-ISO-10008-TC - Tracked Changes. Quality management. Customer satisfaction. Guidance for business-to-consumer electronic commerce transactions
- BS-ISO-10009 - Quality management. Guidance for quality tools and their application
- BS-ISO-10010 - Quality management. Guidance to understand, evaluate and improve organizational quality culture
- BS-ISO-10013 - Quality management systems. Guidance for documented information
- BS-ISO-10014 - Quality management systems. Managing an organization for quality results. Guidance for realizing financial and economic benefits
- BS-ISO-10014-TC - Tracked Changes. Quality management systems. Managing an organization for quality results. Guidance for realizing financial and economic benefits
- BS-ISO-10015 - Quality management. Guidelines for competence management and people development
- BS-ISO-10017 - Quality management. Guidance on statistical techniques for ISO 9001:2015
- BS-ISO-10017-TC - Tracked Changes. Quality management. Guidance on statistical techniques for ISO 9001:2015
- BS-ISO-10018 - Quality management. Guidance for people engagement
- BS-ISO-10019 - Guidelines for the selection of quality management system consultants and use of their services
- BS-ISO-15161 - Guidelines on the application of ISO 9001:2000 for the food and drink industry
- BS-ISO-15378 - Primary Packaging Materials for Medicinal Products, Particular Requirements for the Ap
- BS-ISO-19443 - Quality management systems. Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)
- BS-ISO-9000-2 - Quality management and quality assurance standards. Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
- BS-ISO/IEC-90003 - Software engineering. Guidelines for the application of ISO 9001:2008 to computer software
- BS-ISO/IEC/IEEE-90003 - Software engineering. Guidelines for the application of ISO 9001:2015 to computer software
- BS-ISO/IEC/IEEE-90003-TC - Tracked Changes. Software engineering. Guidelines for the application of ISO 9001:2015 to computer software
- CWA-14644 - Quality Assurance Standards
- CWA-16026 - Standardization of Online Dispute Resolution Tools
- CWA-16030 - Code of Practice for Implementing Quality in Mobility Management in Small & Medium Siz
- DD-CEN-15224 - Health services. Quality management systems. Guide for the use of EN ISO 9001:2000
- DD-CEN-ISO-29001 - Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations
- DD-ENV-ISO-11133-1 - Microbiology of Food & Animal Feeding Stuffs, Guidelines on Quality Assurance & Perfo
- DD-ISO-10004 - Quality management. Customer satisfaction. Guidelines for monitoring and measuring
- DD-ISO-16949 - Quality Management Systems, Particular Requirements for the Application of ISO-9001:2
- DD-ISO-19218 - Medical devices. Coding structure for adverse event type and cause
- DD-ISO-19218-1 - Medical devices. Hierarchical coding structure for adverse events
- DD-ISO-29001 - Petroleum, Petrochemical & Natural Gas Industries, Sector-Specific Quality Management
- HB-10142 - Operational Auditing Handbook, Auditing Business Processes
- HB-10181 - Transition To ISO-9001:2000
- HB-10218 - ISO-9000:2000 Achieving Registration
- KIT-199 - Tickit Guide (Issue 5.5) COMBI-Kit 199, CD-Rom & a4 Paperback
- KIT-47 - Quality Management Systems (BS-En-ISO-9000:2000 Series) Standards Kit CD-Rom
- PAS-150 - Providing rehabilitation services. Code of practice
- PAS-5748 - Specification for the planning, application, measurement and review of cleanliness services in hospitals
- PD-0020 - A Guide to computer-based management systems
- PD-0026 - Software and systems quality framework. A guide to the use of ISO/IEC and other standards for understanding quality in software and systems
- PD-3542 - Standards and quality management. An integrated approach
- PD-6532-5 - Reference materials. Guide to the contents of certificates of reference materials. General requirements for the competence of reference material producers
- PD-6584 - Model for a supplier quality assurance assessment questionnaire
- PD-6677 - Implementation guide for NATO AQAP-160 incorporating all AQAP-160 text and relevant ISO text
- PD-99001 - BS EN ISO 9001, Quality management systems. Requirements, incorporating BS 99001 additional requirements for the built environment sector
- PD-CEN-15592 - Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement
- PD-CEN-ISO-14969 - Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003 (Use EN-ISO-13485)
- PD-CEN-ISO-4450 - Quality management systems. Guidance for the application of ISO 19443:2018
- PD-IEC-62775 - Application guidelines. Technical and financial processes for implementing asset management systems
- PD-ISO-10020 - Quality management systems. Organizational change management. Processes
- PD-ISO-14969 - Medical Devices, Quality Management Systems, Guidance on the Application of ISO-13485
- PD-ISO-16949 - Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
- PD-ISO-19218-2 - Medical devices. Hierarchical coding structure for adverse events
- PD-ISO-23824 - Medical laboratories. Guidance on application of ISO 15189 in anatomic pathology
- PD-ISO-29001 - Petroleum, Petrochemical & Natural Gas Industries, Sector-Specific Quality Management
- PD-ISO-4450 - Quality management systems. Guidance for the application of ISO 19443:2018
- PD-ISO-9002 - Quality management systems. Guidelines for the application of ISO 9001:2015
- PD-ISO-GUIDE-31 - Reference materials. Contents of certificates, labels and accompanying documentation
- PD-ISO-GUIDE 34 - General requirements for the competence of reference material producers
- PD-ISO/IEC-17028 - Conformity assessment. Guidelines and examples of a certification scheme for services
- PD-ISO/IEC-90005 - Systems engineering. Guidelines for the application of ISO 9001 to system life cycle processes
- PD-ISO/TS-29001 - Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations
- TICKIT GUIDE (5.5) - A guide to software quality management system construction and certification to ISO 9001:2000
- TICKITPLUS BPL - Base Process Library (BPL) Version 1.1.2, TickITplus
- TICKITPLUS - CORE SC - Core Scheme Requirements (Csr), Tickitplus
- TICKITPLUS CORE SCH - TickITplus Core Scheme vs 1.1.1
- TICKITPLUS CORE SCHE - TickIT plus Guide - 1.1.1. Core Scheme Requirements
- TICKITPLUS CSR 1.1.2 - TickIT plus Guide. 1.1.2. Core Scheme Requirements
- TS-1 - Issue 5.0 of the TickIT Guide
IEC:
- IEC-300-3-9 - Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems
- IEC-62775 - Application guidelines - Technical and financial processes for implementing asset management systems
ISO:
- ISO-10001 - Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations
- ISO-10001 SPANISH - Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations [Standard in Spanish]
- ISO-10002 - Quality management - Customer satisfaction - Guidelines for complaints handling in organizations
- ISO-10002 SPANISH - Quality management - Customer satisfaction - Guidelines for complaints handling in organizations [Standard in Spanish]
- ISO-10003 - Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations
- ISO-10004 - Quality management - Customer satisfaction - Guidelines for monitoring and measuring
- ISO-10004 SPANISH - Quality management - Customer satisfaction - Guidelines for monitoring and measuring [Spanish version]
- ISO-10005 - Quality management - Guidelines for quality plans
- ISO-10006 - Quality management - Guidelines for quality management in projects
- ISO-10006 SPANISH - Quality management - Guidelines for quality management in projects [Standard in Spanish]
- ISO-10007 - Quality management - Guidelines for configuration management
- ISO-10007 SPANISH - Quality management - Guidelines for configuration management [Standard in Spanish]
- ISO-10008 - Quality management - Customer satisfaction - Guidance for business-to-consumer electronic commerce transactions
- ISO-10009 - Quality management - Guidance for quality tools and their application
- ISO-10010 - Quality management - Guidance to understand, evaluate and improve organizational quality culture
- ISO-10010 FRENCH - Quality management - Guidance to understand, evaluate and improve organizational quality culture [Standard in French]
- ISO-10010 SPANISH - Quality management - Guidance to understand, evaluate and improve organizational quality culture [Standard in Spanish]
- ISO-10011-1 - Guidelines for auditing quality systems -- Part 1: Auditing
- ISO-10011-2 - Guidelines for auditing quality systems -- Part 2: Qualification criteria for quality systems auditors
- ISO-10011-3 - Guidelines for auditing quality systems - Part 3: Management of audit programmes
- ISO-10012 - Measurement management systems - Requirements for measurement processes and measuring equipment
- ISO-10012-1 - Quality assurance requirements for measuring equipment - Part 1: Metrological confirmation system for measuring equipment
- ISO-10012-2 - Quality assurance for measuring equipment - Part 2: Guidelines for control of measurement processes
- ISO-10012/ISO-9000/I - ISO 10012 / ISO 9000 / ISO 9001 Quality Measurement Management Systems Package
- ISO-10013 - Quality management systems - Guidance for documented information
- ISO-10013-RL - Quality management systems - Guidance for documented information
- ISO-10014 - Quality management systems - Managing an organization for quality results - Guidance for realizing financial and economic benefits
- ISO-10014 SPANISH - Quality management systems - Managing an organization for quality results - Guidance for realizing financial and economic benefits [Standard in Spanish]
- ISO-10015 - Quality management - Guidelines for competence management and people development
- ISO-10015-RL - Quality management - Guidelines for competence management and people development
- ISO-10015 SPANISH - Quality-management---Guidelines-for-competence-management-and-people-development-[Standard-in-Spanish]
- ISO-10017 - Quality management - Guidance on statistical techniques for ISO 9001:2015
- ISO-10017 SPANISH - Quality management - Guidance on statistical techniques for ISO 9001:2015 [Standard in Spanish]
- ISO-10018 - Quality management - Guidance for people engagement
- ISO-10019 - Guidelines for the selection of quality management system consultants and use of their services
- ISO-10020 - Quality management systems - Organizational change management - Processes
- ISO-13352 - Guidelines for interpretation of ISO 9000 series for application within the iron ore industry
- ISO-13485 - Medical devices - Quality management systems - Requirements for regulatory purposes
- ISO-13485-HANDBOOK - Medical devices - A practical guide
- ISO-13485 PLUS REDLI - Medical devices - Quality management systems - Requirements for regulatory purposes (includes Redline Version)
- ISO-13488 - Quality systems - Medical devices - Particular requirements for the application of ISO 9002
- ISO-14964 - Mechanical vibration and shock -- Vibration of stationary structures -- Specific requirements for quality management in measurement and evaluation of vibration
- ISO-14969 - Medical devices - Quality mangement systems - Guidance on the application of ISO 13485: 2003
- ISO-15161 - Guidelines on the application of ISO 9001:2000 for the food and drink industry
- ISO-15189 - Medical laboratories - Requirements for quality and competence
- ISO-15189 SPANISH - Medical laboratories - Requirements for quality and competence [Standard in Spanish]
- ISO-15378 - Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
- ISO-16949 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
- ISO-16949 SPANISH - Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations [Standard in Spanish]
- ISO-17582 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government
- ISO-18091 - Quality management systems - Guidelines for the application of ISO 9001 in local government
- ISO-19011 - Guidelines for auditing management systems
- ISO-19011 PACKAGE - ISO 19011, ISO 10005, ISO 10015, ISO/TR 10013
- ISO-19011-RL - Guidelines for auditing management systems (includes Redline Version)
- ISO-19011 SPANISH - Guidelines for auditing management systems [Standard in Spanish]
- ISO-19218 - Medical devices -- Coding structure for adverse event type and cause
- ISO-19218-1 - Medical devices - Hierarchical coding structure for adverse events - Part 1: Event-type codes
- ISO-19218-1-AM1 - Medical devices - Hierarchical coding structure for adverse events - Part 1: Event-type codes- Amendment 1
- ISO-19218-2 - Medical devices - Hierarchical coding structure for adverse events - Part 2: Evaluation codes
- ISO-19443 - Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)
- ISO-19443-AM1 - - Amendment 1: Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) - Amendment 1: Climate action changes
- ISO-22006 - Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production
- ISO-22870 - Point-of-care testing (POCT) - Requirements for quality and competence
- ISO-23824 - Medical laboratories - Guidance on application of ISO 15189 in anatomic pathology
- ISO-29001 - Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations
- ISO-4450 - Quality management systems - Guidance for the application of ISO 19443:2018
- ISO-8402 - Quality Management & Quality Assurance - Vocabulary
- ISO-9000 - Quality management systems - Fundamentals and vocabulary
- ISO-9000-1 - Quality management and quality assurance standards - Part 1: Guidelines for selection and use
- ISO-9000-2 - Quality management and quality assurance standards - Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
- ISO-9000-3 - Part 3: Guidelines for the Application of ISO 9001 To the Development, Supply & Maintenanc
- ISO-9000-4 - Quality management and quality assurance standards -- Part 4: Guide to dependability programme management
- ISO-9000/AM 1 - Amendment 1 for ISO-9000 (Withdrawn & Replaced by ISO-9000)
- ISO-9000CD - ISO-9000 Series Documents on Cd Rom - See ISO-9000 Compendium
- ISO-9000 COLLECTION1 - ISO 9000:2015, ISO 9001:2015, ISO 9004:2009 and ISO 19011:2011
- ISO-9000 COLLECTION2 - ISO 9000 Collection 2
- ISO-9000 COM CD-ROM - ISO 9000 Compendium on CD-Rom
- ISO-9000 COMPENDIUM - ISO 9000 - Quality Management (12th Edition Compendium)
- ISO-9000:SPANISH - Quality management systems - Fundamentals and vocabulary [Spanish version]
- ISO-9001 - Quality management systems - Requirements
- ISO-9001-AM1 - Quality management systems - Requirements
- ISO-9001-AM1 FRENCH - - Amendment 1: Quality management systems - Requirements - Amendment 1: Climate action changes [Standard in French]
- ISO-9001 FOR SMALL B - ISO 9001:2015 for Small Enterprises - What to do?
- ISO-9001 FRENCH - Quality management systems - Requirements [French version]
- ISO-9001/ISO-16949 SET - ISO 9001 and ISO/TS 16949 Automotive Production Quality Management Systems
- ISO-9001 QUALITY MAN - ISO 9001 for Small Businesses, ISO 9001, ISO 9000 and ISO 9001:2000 A Workbook for Service Organizations
- ISO-9001 SMALL BUSIN - ISO 9001:2015 for Small Businesses
- ISO-9001:SPANISH - Quality management systems - Requirements [Spanish version]
- ISO-9002 - Quality management systems - Guidelines for the application of ISO 9001:2015
- ISO-9002 SPANISH - Quality management systems - Guidelines for the application of ISO 9001:2015 [Standard in Spanish]
- ISO-9003 - Quality Systems - Model for Quality Assurance in Final Inspection & Test
- ISO-9004 - Quality management - Quality of an organization - Guidance to achieve sustained success
- ISO-9004-1 - Part 1: Guidelines, Quality Management and Quality System Elements
- ISO-9004-2 - Part 2: Guidelines for Service, Quality Management & Qualitysystems Elements
- ISO-9004-3 - Part 3: Guidelines for Processed Materials, Quality Management
- ISO-9004-4 - Part 4: Guidelines for Quality Improvement, Quality Management & Quality System Elements -
- ISO-9004-RL - Quality management - Quality of an organization - Guidance to achieve sustained success (includes Redline Version)
- ISO-9004 SPANISH - Quality management - Quality of an organization - Guidance to achieve sustained success [Standard in Spanish]
- ISO/DIS-13485 - Medical devices - Quality management systems - Requirements for regulatory purposes
- ISO/DIS-9000 - Quality management systems - Fundamentals and vocabulary - Final Draft Edition
- ISO/DIS-9001 - Quality management systems - Requirements - Final Draft Edition
- ISO-GUIDE 34 - General requirements for the competence of reference material producers
- ISO/IEC-90003 - Software engineering - Guidelines for the application of ISO 9001:2008 to computer software
- ISO/IEC-90005 - Systems engineering - Guidelines for the application of ISO 9001 to system life cycle processes
- ISO/IEC-GUIDE 49 - Guidelines for Development of a Quality Manual for a Testinglaboratory
- ISO/TS-16949 - See: ISO-16949
Other SDOs:
- AFNOR-NF-EN-ISO-13485 - Medical devices - Quality management systems - Requirements for regulatory purposes - Dispositifs mdicaux - Systmes de management de la qualit - Exigences des fins rglementaires
- ANSI/AAMI/ISO-13485 - Medical devices - Quality management systems - Requirements for regulatory purposes.
- ANSI/AAMI/ISO-19218 - Medical Devices -- Coding Structure For Adverse Event Type And Cause
- AS-9100C & ISO-9001 - SAE AS 9100C and ISO 9001
- ASQC-T863 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
- DIN-EN-14969 - Railway Applications - Track - Qualification System for Railway Trackwork Contractors
- DIN-EN-ISO-13485 - Medical devices - Quality management systems - Requirements for regulatory purposes
- DIN-ISO-10007 - Quality management systems - Guidelines for configuration management (ISO 10007:2003)
- EN-12507 - Transportation services. Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries
- EN-14969 - Railway Applications - Track - Qualification System for Railway Trackwork Contractors
- EN-15224 - Quality management systems - EN ISO 9001:2015 for healthcare
- EN-16224 - Healthcare provision by chiropractors
- EN-16247-1 - Energy audits - Part 1: General requirements
- EN-16247-2 - Energy audits - Part 2: Buildings
- EN-16247-3 - Energy audits - Part 3: Processes
- EN-16247-4 - Energy audits - Part 4: Transport
- EN-16247-5 - Energy audits - Part 5: Competence of energy auditors
- EN-16679 - Packaging - Tamper verification features for medicinal product packaging
- EN-60076-6 - Power Transformers, Reactors
- EN-61318 - Live Working, Conformity Assessment Applicable To Tools, Devices & Equipment
- EN-9100 - Quality Management Systems - Requirements for Aviation, Space & Defense Organization
- EN-9101 - Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations
- EN-9102 - Aerospace series - Quality systems - First article inspection requirements
- EN-9103 - Aerospace series - Quality management systems - Variation management of key characteristics
- EN-9104-001 - Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
- EN-9104-002 - Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
- EN-9104-003 - Part 003: Requirements for Aerospace Quality Management System (Aqms) Auditor Training
- EN-9110 - Quality Management Systems - Requirements for Aviation Maintenance Organizations
- EN-9114 - Aerospace series - Quality systems - Direct Ship Guidance for Aerospace Companies
- EN-9115 - Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100)
- EN-9120 - Quality Management Systems - Requirements for Aviation, Space & Defence Distributors
- EN-9121 - Aerospace Series - Quality Management Systems - Assessment Applicable To Stockist Dist
- EN-9131 - Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
- EN-9132 - Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking
- EN-9133 - Aerospace Series, Quality Management Systems, Qualification Procedure for Aerospace S
- EN-9136 - Aerospace series - Root cause analysis and problem solving (9S Methodology)
- EN-9137 - Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
- EN-ISO-12798 - Transport Quality System, Road, Road Rail & Inland Navigation Transport, Quality Manag
- EN-ISO-13485 - Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003)
- EN-ISO-15189 - Medical laboratories - Requirements for quality and competence
- EN-ISO-15378 - Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
- EN-ISO-19011 - Guidelines for auditing management systems
- EN-ISO-22870 - Point-of-care testing (POCT) - Requirements for quality and competence
- EN-ISO-9000 - Quality management systems - Fundamentals and vocabulary
- EN-ISO-9001 - Quality management systems - Requirements
- EN-ISO-9004 - Managing for the Sustained Success of an Organization - a Quality Management Approach
- IWA-1 - Quality management systems -- Guidelines for process improvements in health service organizations
- IWA-12 - Guidelines on the application of ISO 9001:2008 in policing organizations
- IWA-4 - Quality management systems -- Guidelines for the application of ISO 9001:2008 in local government
- JIS-Q-10002 - Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in Or
- JIS-Q-10006 - Quality Management Systems - Guidelines for Quality Management in Projects
- JIS-Q-13485 - Medical Devices - Quality Management Systems - Requirements for Regulatory Purposes
- JIS-Q-19011 - Guidelines for auditing management systems
- JIS-Q-9000 - Quality Management Systems - Fundamentals and Vocabulary
- JIS-Q-9001 - Quality management systems -- Requirements
- SIS-CEN-ISO/TR-4450 - Quality management systems - Guidance for the application of ISO 19443:2018 (ISO/TR 4450:2020)
- SIS-CEN-ISO/TS-29001 - Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010, IDT)
- SIS-CEN/TR-15592 - Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement
- SIS-CEN/TS-15224 - Health services - Quality management systems - Guide for the use of EN ISO 9001:2000
- SIS-EN-ISO-13485 - Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
- SIS-ISO-17582 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government (ISO/TS 17582:2014, IDT)
- SIS-ISO-54001 - Quality management systems Particular requirements for the application of ISO 9001:2015 for electoral organizations at all levels of government
- SIS-ISO/IEC-TR-27008 - Information technology - Security techniques - Guidelines for auditors on information security controls (ISO/IEC TR 27008:2011, IDT)
- SIS-ISO/IEC-TR-90006 - Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011 (ISO/IEC TR 90006:2013, IDT)
- SIS-ISO/IEC-TS-17021-14 - Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 14: Competence requirements for auditing and certification of management systems for records (ISO/IEC TS 17021-14:2022, IDT)
- SIS-ISO/IEC-TS-17021-9 - Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence requirements for auditing and certification of anti-bribery management systems (ISO/IEC TS 17021-9:2016, IDT)
- SIS-ISO/IEC-TS-27008 - Information technology - Security techniques - Guidance for auditors on information security management systems control (ISO/IEC TS 27008:2019, IDT)
- SIS-ISO/TR-10013 - Guidelines for quality management system documentation
- SIS-ISO/TR-10017 - Guidance on statistical techniques for ISO 9001:2000
- SIS-ISO/TR-4450 - Quality management systems Recommendations for the application of ISO 19443 (ISO/TR 4450:2020)
- SIS-ISO/TS-10020 - Quality management systems Organizational change management Processes (ISO/TS 10020:2022, IDT)
- SIS-ISO/TS-16949 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations (ISO/TS 16949:2009, IDT)
- SIS-ISO/TS-17582 - Quality management systems - Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government (ISO/TS 17582:2014, IDT)
- SIS-ISO/TS-19138 - Geographic information - Data quality measures
- SIS-ISO/TS-9002 - Quality management systems - Guidelines for the application of ISO 9001:2015
- SIS-TR-32 - Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement
- SS-624070 - Competence management systems - Requirements
- SS-627799-1 - Information security management - Part 1: Code of practice for information security management
- SS-627799-2 - Information security management systems - Specification with guidance for use
- SS-EN-12397 - Safety requirements for cableway installations designed to carry persons - Operation
- SS-EN-12408 - Safety requirements for cableway installations designed to carry persons - Quality control
- SS-EN-12507 - Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries
- SS-EN-12798 - Transport Quality Management System - Road, Rail and Inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to safety
- SS-EN-13107 - Safety requirements for cableway installations designed to carry persons - Civil engineering works
- SS-EN-13561 - External blinds and awnings - Performance requirements including safety
- SS-EN-13980 - Potentially explosive atmospheres - Application of quality systems
- SS-EN-14969 - Railway applications - Track - Qualification system for railway trackwork contractors
- SS-EN-15224 - Quality management systems - EN ISO 9001:2015 for healthcare
- SS-EN-16224 - Healthcare provision by chiropractors
- SS-EN-16247-1 - Energy audits - Part 1: General requirements
- SS-EN-16247-2 - Energy audits - Part 2: Buildings
- SS-EN-16247-3 - Energy audits - Part 3: Processes
- SS-EN-16247-4 - Energy audits - Part 4: Transport
- SS-EN-16247-5 - Energy audits - Part 5: Competence of energy auditors
- SS-EN-16679 - Packaging - Tamper verification features for medicinal product packaging
- SS-EN-2000 - Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufactures
- SS-EN-29000-3 - Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001 to the development, supply and maintenance ofsoftware
- SS-EN-29004-2 - Quality management and quality system elements - Part 2: Guidelines for services
- SS-EN-30012-1 - Quality assurance requirements for measuring equipment - Part 1: Metrological confirmation system for measuring equipment
- SS-EN-3042 - Aerospace series - Quality assurance - EN aerospace products Qualification procedure
- SS-EN-46001 - Quality systems - Medical devices - Particular requirements for the application of EN ISO 9001
- SS-EN-46002 - Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002
- SS-EN-46003 - Quality systems - Medical devices - Particular requirements for the application of EN ISO 9003
- SS-EN-9100 - Quality Management Systems - Requirements for Aviation, Space and Defence Organizations
- SS-EN-9101 - Aerospace series - Quality management systems - Requirements for conducting audits of aviation, space, and defence quality management Systems
- SS-EN-9102 - Aerospace series - Quality systems - First article inspection requirements
- SS-EN-9103 - Aerospace series - Quality management systems - Variation management of key characteristics
- SS-EN-9104 - Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs
- SS-EN-9104-001 - Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
- SS-EN-9104-002 - Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
- SS-EN-9104-003 - Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification
- SS-EN-9104-1 - Aerospace series - Quality management systems - Part 1: Requirements for Certification of aviation, space, and defense
- SS-EN-9104-3 - Aerospace series - Quality management systems - Part 003: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication
- SS-EN-9107 - Aerospace series - Quality systems - Direct Delivery Authorization - Guidance for Aerospace Companies
- SS-EN-9110 - Quality Management Systems - Requirements for Aviation Maintenance Organizations
- SS-EN-9111 - Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000)
- SS-EN-9114 - Aerospace series - Quality systems - Direct Ship - Guidance for aerospace companies
- SS-EN-9115 - Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100)
- SS-EN-9120 - Quality Management Systems - Requirements for Aviation, Space and Defence Distributors
- SS-EN-9121 - Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000)
- SS-EN-9130 - Aerospace series - Quality systems - Record retention
- SS-EN-9131 - Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
- SS-EN-9132 - Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking
- SS-EN-9133 - Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
- SS-EN-9136 - Aerospace series - Root cause analysis and problem solving (9S Methodology)
- SS-EN-9137 - Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
- SS-EN-9138 - Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements
- SS-EN-9145 - Aerospace series - Requirements for Advanced Product Quality Planning and Production Part Approval Process
- SS-EN-ISO-10007 - Quality management - Guidelines for configurationmanagement (ISO 10 007:1995)
- SS-EN-ISO-10012 - Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003)
- SS-EN-ISO-13485 - Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
- SS-EN-ISO-13485-AM11 - Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
- SS-EN-ISO-13488 - Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002 (revision of EN 46002:1996) (identical to ISO 13488:1996)
- SS-EN-ISO-15189 - Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
- SS-EN-ISO-15378 - Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017)
- SS-EN-ISO-19011 - Guidelines for auditing management systems (ISO 19011:2018)
- SS-EN-ISO-19443 - Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) (ISO 19443:2018)
- SS-EN-ISO-22870 - Point-of-care testing (POCT) - Requirements for quality and competence (ISO 22870:2016)
- SS-EN-ISO-6710 - Single-use containers for human venous blood specimen collection (ISO 6710:2017)
- SS-EN-ISO-80369-20 - Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015)
- SS-EN-ISO-80369-3 - Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016)
- SS-EN-ISO-80369-3-AM1 - Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 1 (ISO 80369-3:2016/Amd 1:2019)
- SS-EN-ISO-80369-7 - Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2021)
- SS-EN-ISO-8402 - Quality management and quality assurance - Vocabulary
- SS-EN-ISO-9000 - Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
- SS-EN-ISO-9000-1 - Quality management and quality assurance standards - Part 1: Guidelines for selection and use
- SS-EN-ISO-9000-3 - Quality management and quality assurance standards - Part 3: Guidelines for the application of (ISO 9001:1994) to the development, supply, installationand maintenance of computer software (ISO 9000-3:1997)
- SS-EN-ISO-9001 - Quality management systems - Requirements (ISO 9001:2015)
- SS-EN-ISO-9002 - Quality systems - Model for quality assurance in production, installation and servicing
- SS-EN-ISO-9003 - Quality systems - Model for quality assurance in final inspection and test
- SS-EN-ISO-9004 - Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018)
- SS-EN-ISO-9004-1 - Quality management and quality systems elements -Part 1: Guidelines
- SS-EN-ISO-9241-110 - Ergonomics of human-system interaction - Part 110: Interaction principles (ISO 9241-110:2020)
- SS-EN-ISO/IEC-18045 - Information security, cybersecurity and privacy protection - Evaluation criteria for IT security - Methodology for IT security evaluation (ISO/IEC 18045:2023)
- SS-EN-ISO/IEC-19896-2 - IT security techniques - Competence requirements for information security testers and evaluators - Part 2: Knowledge, skills and effectiveness requirements for ISO/IEC 19790 testers (ISO/IEC 19896-2:2018)
- SS-EN-ISO/IEC-19896-3 - IT security techniques - Competence requirements for information security testers and evaluators - Part 3: Knowledge, skills and effectiveness requirements for ISO/IEC 15408 evaluators (ISO/IEC 19896-3:2018)
- SS-EN-ISO/IEC-27019 - Information technology - Security techniques - Information security controls for the energy utility industry (ISO/IEC 27019:2017, Corrected version 2019-08)
- SS-EN-ISO/IEC-27040 - Information technology - Security techniques - Storage security (ISO/IEC 27040:2015, IDT)
- SS-EN-ISO/IEC-27041 - Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method (ISO/IEC 27041:2015, IDT)
- SS-EN-ISO/IEC-27042 - Information technology - Security techniques - Guidelines for the analysis and interpretation of digital evidence (ISO/IEC 27042:2015, IDT)
- SS-EN-ISO/IEC-27043 - Information technology - Security techniques - Incident investigation principles and processes (ISO/IEC 27043:2015, IDT)
- SS-EN-ISO/IEC-30111 - Information technology - Security techniques - Vulnerability handling processes (ISO/IEC 30111:2019)
- SS-ISO-10001 - Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations (ISO 10001:2018, IDT)
- SS-ISO-10002 - Quality management - Customer satisfaction - Guidelines for complaints handling in organizations (ISO 10002:2018, IDT)
- SS-ISO-10003 - Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations (ISO 10003:2018, IDT)
- SS-ISO-10004 - Quality Management - Customer satisfaction - Guidelines for monitoring and measuring (ISO 10004:2018, IDT)
- SS-ISO-10005 - Quality management - Guidelines for quality plans (ISO 10005:2018, IDT)
- SS-ISO-10006 - Quality management - Guidelines for quality management in projects (ISO 10006:2017, IDT)
- SS-ISO-10007 - Quality management - Guidelines for configuration management (ISO 10007:2017, IDT)
- SS-ISO-10008 - Quality management Customer satisfaction Guidance for business-to-consumer electronic commerce transactions (ISO 10008:2022, IDT)
- SS-ISO-10010 - Quality management Guidance to understand, evaluate and improve organizational quality culture (ISO 10010:2022, IDT)
- SS-ISO-10012-1 - Quality assurance requirements for measuring equipment - Part 1: Metrological confirmation system for measuring equipment
- SS-ISO-10013 - Quality management systems - Guidance for documented information (ISO 10013:2021, IDT)
- SS-ISO-10014 - Quality management systems - Managing an organization for quality results - Guidance for realizing financial and economic benefits (ISO 10014:2021, IDT)
- SS-ISO-10015 - Quality management - Guidelines for competence management and people development (ISO 10015:2019, IDT)
- SS-ISO-10017 - Quality management - Guidance on statistical techniques for ISO 9001:2015 (ISO 10017:2021, IDT)
- SS-ISO-10018 - Quality management - Guidelines on people involvement and competence (ISO 10018:2012, IDT)
- SS-ISO-10019 - Guidelines for the selection of quality management system consultants and use of their services (ISO 10019:2005, IDT)
- SS-ISO-15161 - Guidelines on the application of ISO 9001:2000 for the food and drink industry
- SS-ISO-15590-4 - Petroleum and natural gas industries - Factory bends, fittings and flanges for pipeline transportation systems - Part 4: Factory cold bends (ISO 15590-4:2019, IDT)
- SS-ISO-18091 - Quality management systems - Guidelines for the application of ISO 9001:2008 in local government (ISO 18091:2014, IDT)
- SS-ISO-19443 - Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) (ISO 19443:2018, IDT)
- SS-ISO-19472 - Machinery for forestry - Winches - Dimensions, performance and safety (ISO 19472:2006, IDT)
- SS-ISO-3019-2 - Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series
- SS-ISO-8402 - Quality management and quality assurance - Vocabulary
- SS-ISO-9000 - Quality management and quality assurance standards - Guidelines for selection and use
- SS-ISO-9000-3 - Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001 to the development, supply and maintenance ofsoftware
- SS-ISO-9001 - Quality systems - Model for quality assurance in design/development, production, installation and servicing
- SS-ISO-9002 - Quality systems - Model for quality assurance in production, installation and servicing
- SS-ISO-9003 - Quality systems - Model for quality assurance in final inspection and test
- SS-ISO-9004 - Quality management and quality system elements - Guidelines
- SS-ISO-9004-2 - Quality management and quality system elements - Part 2: Guidelines for services
- SS-ISO-9004-4 - Quality management and quality system elements - Part 4: Guidelines for quality improvement
- SS-ISO/IEC-27001 - Information technology - Cybersecurity and privacy protection - Information security management systems - Requirements (ISO/IEC 27001:2022, IDT)
- SS-ISO/IEC-27005 - Information security, cybersecurity and privacy protection Guidance on managing information security risks (ISO/IEC 27005:2022, IDT)
- SS-ISO/IEC-27013 - Information technology - Security techniques - Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
- SS-ISO/IEC-27041 - Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method (ISO/IEC 27041:2015, IDT)
- SS-ISO/IEC-27042 - Information technology - Security techniques - Guidelines for the analysis and interpretation of digital evidence (ISO/IEC 27042:2015, IDT)
- SS-ISO/IEC-27043 - Information technology - Security techniques - Incident investigation principles and processes (ISO/IEC 27043:2015, IDT)
- SS-ISO/IEC-90003 - Software engineering - Guidelines for the application of ISO 9001:2000 to computer software (ISO/IEC 90003:2004, IDT)
- UNE-EN-60335-2-58 - Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
- UNE-EN-9102 - Aerospace series - Quality systems - First article inspection requirements
- UNE-EN-9103 - Aerospace series - Quality management systems - Variation management of key characteristics
- UNE-EN-ISO-15378 - Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
- UNE-EN-ISO-22870 - Point-of-care testing (POCT) - Requirements for quality and competence
- UNE-EN-ISO-9001 - Quality management systems - Requirements (Spanish Language Edition)